Kylie's Kreations

You can also find them on Facebook

Instagram

Flair Buttons Cocoa Vanilla Studio

Kylie xx

Best day ever for Craft on the Run

Hi all,

I'm back to share my second layout with you using the Fairground Fun Mini collection from 3 Quarter Design

Included in the kit:

3x 12"x12" themed papers

3x 3.8"x12" sheets matching elements and mats

A set of coordinating chipboard pieces.

I had previously already cut out all the elements.

I used a single 4"x6" photo and as always popped it up off the page using foam mounting tape. I created extra layers behind the photo using the photo mats and created a visual diagonal line from the top left to bottom right of the page with the elements and embellishments.

I painted the chipboard horse and finished with a couple of Flair Buttons from Cocoa Vanilla Studio.

Products Used:

Foam mounting tape

Magenta Cardstock

Check out Kylie's Kreations at:

Instagram: @Kyliecoleman50

Pinterest: https://pin.it/7wbUP2V

Shop Craft on the Run at:

You can also find them on Facebook

Instagram

Kylie xx

Wednesday, October 14, 2020

Hello spring for Twitchit Craft Kits

Hi all,

Did you notice home many 'SPRING' elements were in the Tropical Pink Heatwave kit from Twitchit Craft Kits.

I couldn't help myself I just had to create a Wreath layout with them.

I began with fussy cutting out all the florals from the 'summer floral' page. Not gonna lie this did take some time.

Once cut out I place them around the page in a large circle to make sure I liked the placement. Once happy with that I glued some done to the page and others I adhered with foam tape for dimension.

I added in the spring tags and journal cards and added some die cut green leaves to fill in the wreath.

I matted my photo and adhered with foam tape to the left side of the wreath and carried the visual line across the page with the tags.

I tucked in some cotton thread behind the florals and finished with some gold splatters.

For more kits and inspiration please go to:

https://www.twitchit.com.au/

Check out Kylie's Kreations at:

Instagram: Kyliecoleman50

Pinterest: https://pin.it/7wbUP2V

Thanks for stopping by and happy crafting everyone

Kylie xx

December for Craft on the Run

Hi all,

I'm sharing another layout using the Beautiful

Winter Wonderland Collection from Mintay Papers.

Again for this layout there was some fussy cutting involved. I choose a piece of white textured cardstock from my stash as the base and added a four inch stripe of the snowflake page across the top of the page.

To that I then layered diagonally from top right to bottom left the frames and photo mats. Once the base was complete I went about embellishing with all the fussy cut elements. I layered some with foam tape for dimension, some in behind others and some on top. I made sure that all the elements were touching. this helps them to look grounded rather than floating in space.

Finally I added some chipboard pieces and called it done.

I plan on using this page for our 2020 Christmas so I have left the photo mats bare.

Check out below for some close up photos.

Thanks for stopping by and I hope I have inspired you in some way today.

Happy Crafting xx

Products Used:

Foam mounting tape

Winter Wonderland

Check out Kylie's Kreations at:

Instagram: @Kyliecoleman50

Pinterest: https://pin.it/7wbUP2V

Shop Craft on the Run at:

You can also find them on Facebook

Instagram

Kylie xx

Monday, October 5, 2020

Merry and Bright for Craft on the Run

Hi all,

I'm up on the Craft on the Run blog today sharing my latest layout using the Beautiful Winter Wonderland Collection from Mintay Papers and let me just say this collection is truly stunning.

As soon as I saw the snow globe page I immediately wanted to make a giant snow globe shaker page.

Now I'm not going to lie this did present a challenge some what.

But I was determined.

To began to slowly cut around the inside of the globe with a scalpel. I cut around the most predominant images on the page and left a border approx 1/4 inch thick around the entire globe (this is needed to hide and adhere the tape which gives the dimensional lift and allow the shaker sequins to move around). I then cut around the outside of the globe with scissors.

Next to make the shaker. Now we have the cut out we need to make the window. For this I used a piece of acetate and glued to the backside of the shaker and cut off the excess. To create the dimension I used double sided foam adhesive and cut thinly enough to hide behind the shaker.

Next I glued the shaker to the base page. I had chosen the same paper as the base. I left a gap big enough to pour the sequins in at the top before closing up the shaker.

Now that the shaker was complete I went to work on embellishing with the elements from the cut a part sheet and chipboard pieces.

I am yet to add a phot as I want to save it for my Christmas 2020 photos.

I hope I have inspired you in some today.

Check out Kylie's Kreations at:

Instagram: @Kyliecoleman50

Pinterest: https://pin.it/7wbUP2V

Shop Craft on the Run at:

You can also find them on Facebook

Instagram